The UBY GateSafe NFC reader allows you to check the status of a tag before entering the monitored area. Prevent unauthorised persons from entering your site.
Our reader connects directly to your preferred access control system.
It is also an excellent way to record all entries and exits on your site.
A Class 1 sound level meter that measures ambient sound, the SV-307 allows you to quantify sound volume to the nearest decibel.
Its real-time third-octave band frequency analysis allows you to determine the influence of low and high frequencies on the overall value.
The C50 is a new generation of permanent noise monitoring station. This station is designed for continuous monitoring with environmental and airport characteristics available simultaneously.
The Aquatroll 500 is a fully customisable connected probe for monitoring up to 4 parameters in ground and underground water
Our omnidirectional sensor identifies and locates noise within a 100m radius. It’s embedded AI algorithm also recognises the origin of noise in order to help worksite staff make faster, better informed decisions.
The PULSE sensor is a versatile meter reader.
It allows you to remotely monitor your water, gas and electricity consumption in real time from a single dashboard.
It measures indoor air quality, humidity, temperature and atmospheric pressure. It also measures fine particles (PM1, 2.5 and 10) and CO2.
It quantifies up to 3 different gases: NO2, O3, EtO, as well as odour intensity (odour unit distance).
The station measures rainfall and rainfall velocity (rain gauge), wind speed and direction (wind vane, anemometer), temperature, air pressure, UV and solar radiation, and humidity.
SVR 100 is a compact, non-contact radar sensor for measuring water surface velocity and flow direction. Designed to measure flow in open rivers and canals where reliable velocity data is required on a continuous basis, particularly during floods or when there are high concentrations of suspended sediments.
Home / UBY Environment / uVibes – vibration sensor Autonomous vibration sensor equipped with MEMS sensors measuring accelerations on 3 axes and transmitting the minimum,average and maximum values over 20 minutes.Quick to install and compatible both indoors and outdoors, it continuously measures impacts and movements on bridges, buildings and monuments.Alert thresholds can be configured, allowing
