AIR QUALITY SENSOR – POD2
It measures indoor air quality, humidity, temperature and atmospheric pressure. It also measures fine particles (PM1, 2.5 and 10) and CO2.
It quantifies up to 3 different gases: NO2, O3, EtO, as well as odour intensity (odour unit distance).
Technical features
Sound level meter: Class 1, ST30A MEMS microphone
Data type: Decibels (dBa) with frequency spectrum (20Hz to 20 kHz), LAeq, LA10, LA90
Data visualisation: Real-time graphNetwork: 2G/3G/4G, 4G modem for data transmission
Power supply: Mains powered with internal battery in case of power failure
Network: 2G/3G/4G, Ethernet, Wi-Fi, uses a built-in modem to send measurement data
Power supply: Mains plug
Dimensions (mm): 110 x 110 x 137
Weight: 360 g
Mounting method and conditions: It is placed on the surface provided for this purpose; it is not fixed in place
Technical Requirements and Maintenance
Required equipment: 2G/3G/4G network coverage or WiFi network, Ethernet; mains power socket
Maintenance: Remote supervision by UBY
Annual calibration by UBY
The platform
This graph shows changes in nitrogen dioxide levels throughout the day at three different sites (green, black, orange).
Find alerts on the platform for threshold exceedances for all monitored elements (gas, particles, humidity, etc.).
FAQ
Are administrative authorisations required to install the sensor?
Installation permits must be obtained for public structures and listed buildings. These are the responsibility of the customer.
They are not essential for private structures.
Is the sensor compliant with the GDPR?
The sensor, its software and algorithms are fully compliant with the GDPR.